Nikon Mount Adapter FTZ II

A second-generation mount to allow you to use an F-Mount lens with the Nikon Z series Camera, the Nikon Mount Adapter FTZ II has improved ergonomics allowing plenty of room to comfortably position your fingers when shooting vertically. No matter which F lenses you use, there is no loss in image quality.

Sharper than ever

Auto exposure shooting is enabled for hundreds of F-mount lenses. And F-mount lenses with a built-in autofocus motor retain full autofocus abilities.*

* Full AF/AE is supported when using FX or DX AF-S Type G/D/E, AF-P type G/E, AF-I type D, and AF-S/AF-I teleconverters.

Steadier than ever

If you’re using an F-mount lens with VR, in-lens yaw-and-pitch detection is supplemented with the in-camera roll detection. And when you’re shooting with a non-VR F-mount lens, yaw, pitch, and roll are corrected in-camera.

The NIKKOR look

Seamless in more than just operation. The Mount Adapter FTZ II is finished in leather-tone paintwork, smoothly blending the look of your F-mount lens with the adapter. And with your Nikon Z camera.

Go there

A dust- and drip-resistant build incorporates rubber seals for lens and camera connections as well as buttons and levers. The tough, light magnesium-alloy barrel means you’re always good to go.

Tech Specs:

Weight: 125g

Compatible cameras: Nikon Z mount mirrorless cameras and some Nikon Vision products（FSA-L2, NSA-L1）

Compatible lenses: NIKKOR including AI and after: AF-P, AF-S, AF-I

Front cap: BF-1B Body Cap (supplied)

Rear cap: LF-N1 Lens cap (rear cap, supplied)

Maximum diameter x length: Approx. 70 mm (Maximum diameter excluding protrudes) x 70 mm (35 mm from the principal axis to the bottom)